Cleaning up the dirt that accumulates in the tiles and grout of our spaces, such as bathrooms or kitchens, tends to be quite complicated, and if the stains are very difficult to remove we will end up contacting a specialist who does this work; ¿but what if you discover that there is a simple guide for beginners that allows us to obtain the knowledge to carry out the task of effectively cleaning the tiles and grout ourselves?
To clean the tile or tiles in our spaces it is usually enough to brush them with a soapy solution, but in the case of grout this is a little more complex because it represents a slightly more intricate space, also because of the location in which this kind of surface is commonly found, many germs can accumulate and proliferate easily.
It is in this case where we must put into action disinfecting agents, whether chemical or not, that allow us to penetrate deeply and remove the dirt.
- To deeply clean the tile and grout is recommended to work with hot water on the surface, this can be spread with a sprayer, and on the other hand if you have some implement that allows us to add steam over the area, its implementation would be ideal to loosen the deepest dirt.
- Before the area is completely cooled down, a toothbrush should be vigorously wiped with a vinegar or lemon brush soaked with baking soda, then a wet cloth or sponge should be wiped over the surface to remove any excess dirt.
Generally, after a long time the grout tends to discolor and become dull due to the accumulated dirt and continuous cleaning, which is why it is best to paint it a different color.
To paint a grout in another color the first thing to do is to select a specialized dye for this, brown colors are best to avoid having to go through this procedure again over time.
The entire grout must then be thoroughly cleaned to avoid any traces of mold, bleach or other additives may be used to achieve our objective, before proceeding to apply the dye on the grout should be expected to dry completely or it could ruin the work.
When placing the stain on the grout, we must remember that it is permanent and it is not possible to remove it from the tiles once it has dried, therefore, it is necessary to take precautions regarding the subject and to have a cloth to remove any excess that may get in the way of our work in order to keep the same clean
If it is necessary to apply additional coats of dye it is advisable to wait about 24 hours between applications to generate a well-defined work, finally to finish the re-coloring of the grout we need to use an oil-based sealer to keep the work in good condition.